Q:

Some of my Forstner bits are getting a little dull. How do I sharpen them?

Del Fussel, Parker, CO

A:

Sharpening a forstner bit isn’t difficult. All you need is a small file and a slip stone. It takes only a few strokes to get a sharp edge, so don’t overdo it. It is also critical that you never hone or file the outside of the rim, which would lessen the bit’s diameter, or the beveled side of the chippers, which could change their cutting angle.

Start by thoroughly cleaning the bit to remove any built-up pitch or other debris. Sharpen the inside of the rim, then the chippers, and the centering spur last.

Hone the rim first

Use a slip stone with a rounded edge and sharpen the inside of the rim only.

File the back of teeth

Some Forstner bits have sawlike teeth. A few strokes with a small triangular file will sharpen them.

Hone the front side of the chippers

Make sure the chipper and rim meet at a crisp 90º corner. A rounded corner won’t shear the grain cleanly.

 Right on point

Lightly file the centering spur to a sharp point, but keep the point centered. Johnson uses an index card to protect the chippers from the file.

Fine Woodworking Recommended Products

Milwaukee M12 23-Gauge Cordless Pin Nailer

This tool is designed for convenience. The battery and pins are easy to load, and the safety lock operates with the same finger you use to pull the trigger. The depth of set is adjustable, there’s a work light, and there’s a hook for hanging the tool on your toolbelt. A gauge lets you keep track of when you’ll need to recharge.

Buy at Amazon

Honing Compound

This honing compound is great for loading into a buffing wheel and polishing an assortment of metals.

Buy at Amazon

Norton Water Stones

This kit includes everything you need to sharpen all of your blades, with water stones in four grits and a separate stone to keep them flat.

Buy at Amazon