The Tension is Easy to Set and Lock

Many furniture makers have a fretsaw, and typically it is called into action like a coping saw to cut out the waste between dovetails. Although it works well for that basic task, it can do more. With a large throat and a fine-tooth blade, the fretsaw is an age-old tool used to cut shapes in thin material for marquetry and other inlay. The Knew Concepts fretsaw is undoubtedly an improvement on the old standard. The frame doesn’t flex as much as a coping saw, so you can up the tension for better control. And the tension is easy to set and lock. The saw is thoughtfully engineered and well made. For a host of fine cuts in small spaces, this is a great tool.

Fine Woodworking Recommended Products

Tite-Mark Marking Gauge

These gauges can be easily and precisely adjusted with one hand, which allows you to set the tool while holding a ruler or workpiece in the other. The quality is exceptional, and all have sharp cutters that offer great visibility.

Buy at Lie-Nielsen Toolworks

Veritas Micro-Adjust Wheel Marking Gauge

The adjuster runs through the beam from a small knob at the back end right to the cutting wheel, which moves in and out as you turn the knob. This arrangement works well but makes adjustments a two-handed operation, requiring a little more effort.

Buy at Lee Valley

Starrett 4" Double Square

Head is easy to remove, replace, and lock down; narrowest blade, at 5⁄8 in., made it easier to fit into tight places; hard to read under bright lights.

Buy at Woodcraft Buy at Amazon