Synopsis: The miter shoot, a jig that consists of two working surfaces aligned at 45° and 90° that is clamped to the workbench, can be used to true up parts for miter joints, trim a tenon’s cheeks at 90°, and trim and square tenon shoulders. Making one takes some time and a commitment to accuracy — all the surfaces and angles must be true, and the sliding parts must run smoothly without sloppiness. But once you build one, you’ll find it hard to do without it: Miters will lose their capacity to intimidate, and you’ll be truing up tenons without the risk of tearout.

From Fine Woodworking #190

“What’s that?” asked Peter Korn, looking at the thing clamped in the tail vise of my bench. The object was a screw miter shoot that I use on almost every project. Korn, director of the Center for Furniture Craftsmanship in Maine, had come to my shop to invite me to teach at the school. When I accepted, he asked if I would bring my miter shoot. “No,” I replied, “but I’ll make one for you while I’m there.”

In my workshop, students make a miter shoot as their first task. It teaches them the importance of accuracy, care, and respect for tools, and they leave with a jig that will benefit them throughout their careers.

The miter shoot consists of two working surfaces aligned at 45° and 90°. The former is used to true up miter joints; the latter, to square up tenon shoulders and cheeks.

I can’t claim credit for inventing this tool. As a student at the Royal College of Art in London, I discovered a decrepit one gathering dust under a bench. Even in poor condition, the jig was so much better than a bench vise for trimming miters that I decided to build one for myself.

The base has a sliding block The shoot consists of a metal press screw attached to a fixed block; a pair of wooden jaws, one of which slides along a tongue-and-groove base; and a block attached to the underside of the base that mounts in a bench vise. I quickly realized that the secret to this tool is accuracy: The sliding jaw must run smoothly on the base with no sloppiness. Time invested in construction will pay dividends during use.

For the full article, download the PDF below:

Fine Woodworking Recommended Products

Marking knife: Hock Double-Bevel Violin Knife, 3/4 in.

This heavy, double-beveled knife stays on track in all directions, and works just fine without adding a handle.

Buy at Lee Valley

Suizan Japanese Pull Saw

A versatile saw that can be used for anything from kumiko to dovetails. Mike Pekovich recommends them as a woodworker's first handsaw.

Buy at Amazon

Pfiel Chip Carving Knife

Great to use as a marking knife for laying out joinery and easy to sharpen.

Buy at Amazon

View PDF