Faced with a mountain of home-improvement projects, John F. Matousek devised a technique for producing a large number of loose mortise-and-tenon joints. He designed a machine to make accurate cuts that is also easily adjustable. Detailed project plans will help you reproduce this shopmade tool with off-the-shelf parts. The horizontal mortiser is designed for joining 3/4-in-thick workpieces; it can be modified for other uses. It uses a solid-carbide, 1/4-in spiral upcut bit, and is powered by a standard 1-1/2-hp router. The machine has two movable tables and can be used it also as a conventional router table. A detailed exploded drawing shows how it was built and how it works.

From Fine Woodworking #141

Fine Woodworking Recommended Products

Marking knife: Hock Double-Bevel Violin Knife, 3/4 in.

This heavy, double-beveled knife stays on track in all directions, and works just fine without adding a handle.

Buy at Lee Valley

Double Sided Tape

A thin woven core makes XFasten tape strong yet not too thick (0.008 in.), and helps it hold powerfully without being difficult to peel off.

Buy at Amazon

MicroJig Matchfit dovetail clamps

These unique clamps have angled tips that hold templates and fences in place without getting in the way.

Buy at Amazon

View PDF