As anyone in the market for a combination blade, also called a general-purpose blade, knows, there’s no shortage of choices, even in the upper price range. Curious to know whether any of these blue bloods stood out, I decided to test 14 top-of-the-line 10-in. combination saw blades for smoothness of cut.

With each new blade, I ripped and crosscut a 3/4-in.-thick maple board to produce a 2-in.-square sample. After that, the ripped and crosscut edges on each sample were checked for smoothness on a high-tech machine called a surface and roughness profiling system, which can measure very small surface deviations. Then, based on the machine measurements, the smoothness of each rip and crosscut was rated as excellent, very good, good, or fair.

The Systematic scored one of only two fairs in the rip cut and a good in the crosscut, making it the lowest scorer in the bunch.
 

Fine Woodworking Recommended Products

Hedgehog featherboards

The Hedgehog's unique spiral shape and single knob make it easy to set up and fast to adjust.

Buy at Amazon

Grizzly G0495X Industrial Helical Cutterhead 8-in. Jointer

Regardless of the board’s grain, this jointer produced excellent results. Its fence was totally flat, worked smoothly, and locked well, staying in place even after jointing multiple edges. Getting the fence to 90° was very easy, but the 90° stop was a little tricky to set and the fence did not go back to square when using it. For those who would use it, there is also a digital depth-of-cut scale.

Buy at Amazon

Freud Super Dado Saw Blade Set 8" x 5/8" Bore

Leaves a dado with a flat bottom and even performs excellent on plywood and melamine.

Buy at Woodcraft