To test bandsaw blades for resawing, we selected 1/2-in.-wide blades, a size well suited to resawing on a 14-in. bandsaw. The same saw (Delta model 28-241) was used for all of the tests. When it comes to resaw blades, most woodworkers have only three demands: that the blade be reasonably fast and that the cut be both reasonably flat and reasonably smooth. To measure speed, we timed low long it took to cut through a section of  9-1/2-in.-wide soft maple, with short times equating to fast-cutting blades. To measure flatness, we measured the amount of barreling on the test block using a straightedge and a set of feeler gauges. To find the smoothest cutters, we measured how much sanding had to be done to remove the blade marks. The Jet carbon-steel blade stalled during testing, so no values were recorded.

Fine Woodworking Recommended Products

Rockler Dust Right 650 CFM

While all five of the smaller units will collect chips efficiently when deployed properly, the 3/4-hp Rockler was just a bit more powerful in our suction test.

Buy at Amazon

Festool DF 500 Q-Set Domino Joiner

This joinery machine revolutionized woodworking for so many. There is no easier way to get mortise and tenon joints—but it comes at a cost.

Buy at Amazon

Veritas Precision Square

This precision square is incredibly versatile, from checking squareness to dialing in machine setups.

Buy at Lee Valley