To test bandsaw blades for resawing, we selected 1/2-in.-wide blades, a size well suited to resawing on a 14-in. bandsaw. The same saw (Delta model 28-241) was used for all of the tests. When it comes to resaw blades, most woodworkers have only three demands: that the blade be reasonably fast and that the cut be both reasonably flat and reasonably smooth. To measure speed, we timed low long it took to cut through a section of  9-1/2-in.-wide soft maple, with short times equating to fast-cutting blades. To assess flatness, we measured the amount of barreling on the test block using a straightedge and a set of feeler gauges. To find the smoothest cutters, we measured how much sanding had to be done to remove the blade marks. The SuperCut Carbon Tool Steel blade performed well in the speed test, cutting through the soft maple test block in 20.26 seconds.  

Fine Woodworking Recommended Products

Forrest Woodworker II Blade

A high quality, staple blade for your table saw. With 48 teeth, it is suitable for both ripping and crosscutting.

Buy at Amazon

Stanley Powerlock 16-ft. tape measure

With its smooth lock, tough case, compact size, and excellent accuracy, this Stanley tape is perfect for workshop use.

Buy at Amazon

DeWalt 735X Planer

At high speed, the planer works fast and leaves a smooth surface. But the slower, finish speed produces an almost glass-smooth surface. Knife changes are easy.

Buy at Amazon