If you cut a lot of thick stock, or if you resaw stock in the 9-in.-wide to 12-in.-wide range, an 18-in. bandsaw is worth considering. Not only does it offer extra capacity, but most 18-in. saws also have more horsepower to cut faster. I looked at 11 models ranging in price from $900 to almost $3,000, evaluating cutting ability, machine sturdiness, and blade-changing ease. The Rikon showed acceptable results in the resaw test, did well in the curve-cutting test, and ranked seventh in the frame-deflection test. The cast-iron trunnion support and steel trunnions are a plus. Blade changing was relatively easy, and it has a good fence.

Fine Woodworking Recommended Products

Rockler Dust Right 650 CFM

While all five of the smaller units will collect chips efficiently when deployed properly, the 3/4-hp Rockler was just a bit more powerful in our suction test.

Buy at Amazon

Rikon 10-3061 10-in. Deluxe Bandsaw

The 1⁄2-hp motor has all the power needed to resaw at its maximum capacity of 5 in.

The saw has two speeds: 3,280 sfpm (surface feet per minute) for wood and 1,515 sfpm for soft metals and some plastics.

Buy at Amazon

Shop Fox W1826

The thick, felted bag on this Shop Fox is a plus and a minus. On one hand, it makes the unit much less expensive than collectors with canister filters, and also lighter and easier to hang on the wall. Without a separate plastic bag to catch chips, however, they stay in the felt bag, and the shortish zipper on the bottom makes it tough to shake them out. Otherwise, the W1826 is an excellent value.

Buy at Amazon