Most woodworkers buy only one set of dado heads, so it’s important to find one that works well at the right price. Author Steve Latta tested 15 sets of 8-in. stacked dado sets with carbide teeth. He and his students compared more than 500 samples of dadoes cut cross-grain in red-oak veneer-core plywood and in particleboard-core melamine. They evaluated tearout, how deeply the outside blades cut a visible scribe, and whether the bottom of the cut was flat and smooth. Craftsman’s Excalibur dado set features two center blades with 10 teeth and 2 outside blades with 22 each each. The set produced fair cuts in both plywood and  melamine; there were no visible scoring marks and bottom cuts were smooth.

Fine Woodworking Recommended Products

Rockler Dust Right 1250 CFM

You’ll need help to get this heavy unit onto its bracket, but if you’re looking for a central dust collector that won’t gobble floor space, this may be the unit for you.

Buy at Rockler

Milwaukee M12 23-Gauge Cordless Pin Nailer

This tool is designed for convenience. The battery and pins are easy to load, and the safety lock operates with the same finger you use to pull the trigger. The depth of set is adjustable, there’s a work light, and there’s a hook for hanging the tool on your toolbelt. A gauge lets you keep track of when you’ll need to recharge.

Buy at Amazon

Grizzly G0495X Industrial Helical Cutterhead 8-in. Jointer

Regardless of the board’s grain, this jointer produced excellent results. Its fence was totally flat, worked smoothly, and locked well, staying in place even after jointing multiple edges. Getting the fence to 90° was very easy, but the 90° stop was a little tricky to set and the fence did not go back to square when using it. For those who would use it, there is also a digital depth-of-cut scale.

Buy at Amazon