The most common problems caused by moisture in wood are finishes that don’t stick, joinery that breaks apart, and boards that take on new and unwanted shapes after milling. The solution to all these problems is to use wood that has been dried to the right moisture content, between 8% and 12%. And the easiest way to determine moisture content is to use a moisture meter.

Moisture meters use either pins or an electromagnetic plate (pinless) to measure moisture. Some pin-style meters take deep readings with hammer probes; others take readings from 5/8 in. or less. Both styles leave marks. Pinless meters leave no marks but require the wood surface to be smooth; they detect moisture down to about 5/8 in. I looked at a dozen meters priced from $60 to $350 and was surprised to find that their overall accuracy is quite good.

The Delmhost J-2000 comes with a well-written, easy-to-follow manual. The settings, however, are complicated to use because each button is used for different functions at different times. It saves and accumulates readings and has built-in temperature compensation. A hammer probe is an accessory. This meter provides a detailed digital readout.

Fine Woodworking Recommended Products

Estwing Dead-Blow Mallet

A quality dead-blow mallet that packs and punch but isn't too heavy for furniture work.

Buy at Amazon

Blackwing Pencils

If you've listened to Shop Talk Live, you've heard them talk more about these pencils than you could possibly imagine.

Buy at Amazon

Double Sided Tape

A thin woven core makes XFasten tape strong yet not too thick (0.008 in.), and helps it hold powerfully without being difficult to peel off.

Buy at Amazon