Midsize plunge routers, those in the 2-hp class, have enough muscle to tackle most tasks, yet they’re relatively easy to handle. Unlike a fixed-base router, a plunge router lets you lower the spinning bit straight down into a workpiece. That makes it a good choice for those who cut a lot of stopped grooves, dadoes, and mortises. So with that in mind, I gathered all eight of the midsize plunge routers on the market and gave each a thorough going-over. 

I checked to see how fussy it was to turn the machine on and off, to change router bits, and to set the plunge depth. I looked at how much finger contortion it took to set the switch locks and the plunge-lock mechanisms. I also wanted to see how well the multiple-stop systems worked. I checked the handles for comfort, then measured each router for noise, vibration, and collet runout. And after all of that, I tested each router by running it through a sheet of plywood.

The Skil has an easy-to-activate on/off switch and a lightweight body. However, it accepts only 1/4-in.-shank bits, has no multiple-stop system, and is noisy. Consider it if you run a router only occasionally.

Fine Woodworking Recommended Products

Ridgid EB4424 Oscillating Spindle/Belt Sander

With five spindles sized from 1/2 in. to 2 in. and a 4 X 24-in. belt, this sander has become a staple in many a shop Fine Woodworking visits.

Buy at Amazon

Bosch 12V Trim Router

Trim routers are easier to handle when you cut the cord, and the Bosch’s compact, curvy shape and unique base give it unmatched control.

Buy at Amazon

Stanley Powerlock 16-ft. tape measure

With its smooth lock, tough case, compact size, and excellent accuracy, this Stanley tape is perfect for workshop use.

Buy at Amazon