The author looked at 13 popular 3-hp, 220v 10-in. cabinet saws. In addition to evaluating the saws for power and safety, he also tested for tabletop flatness, for runout at the arbor shaft and arbor flange, and for parallelism of the blade to the miter slot. He found that all the saws offered plenty of power, solid rip fences, smooth controls, and flat tabletops. The General International 50-260 M1 had very good blade/miter slot parallelism. Its switch, however, is easy to shut off accidentally. There is storage for accessories in the saw cabinet, and an extension table and legs are optional.

Fine Woodworking Recommended Products

Ridgid R4331 Planer

Priced nearly $300 less than the DeWalt 735X, the Ridgid R4331 is an excellent value. Its three-knife cutterhead left wonderfully clean surfaces on plainsawn white oak and white pine. It did not perform nearly as well on curly maple as the 735X.

Buy at Amazon

Grizzly G0495X Industrial Helical Cutterhead 8-in. Jointer

Regardless of the board’s grain, this jointer produced excellent results. Its fence was totally flat, worked smoothly, and locked well, staying in place even after jointing multiple edges. Getting the fence to 90° was very easy, but the 90° stop was a little tricky to set and the fence did not go back to square when using it. For those who would use it, there is also a digital depth-of-cut scale.

Buy at Amazon

Stanley Powerlock 16-ft. tape measure

With its smooth lock, tough case, compact size, and excellent accuracy, this Stanley tape is perfect for workshop use.

Buy at Amazon