To test the general international mortiser’s mettle, I used the 1⁄2-in. chisel to plunge a bunch of 1-1⁄2-in.-deep mortises in both softwoods and hardwoods. Then I used the other three included chisels for the same test. The machine had no problemwith these jobs, and revealed a host of user-friendly features.

Large openings in the head casting on both sides of the drill chuck make it easy to use a standard-length chuck key for bit changes. The table is large and expands even more with slide-out extensions. The cast-iron fence adjusts smoothly. However, one spacer between the bottom of the fence and the T-slot nut was just a hair too thick, preventing the bolt from locking securely. The fix was easy. A few licks with a file thinned the spacer enough to get adequate clamping with the lever handles. Two rubber rollers hold stock securely against the fence while allowing it to be moved sideways.

What’s really cool about the mortiser is that most operations are tool-free. The chisel holder, the fence, the side covers, the stops, and the hold downs all have easy-to-grasp knobs for simple and secure operation.

I had one concern about this tool: The drill chuck runout really rattled the bits in the chisel. However, because these aren’t precision drilling machines, the runout didn’t compromise performance.

The General International mortiser is a good buy. It cuts fast and accurate mortises, and all the stops and hold-downs do their jobs without moving or shifting.

Fine Woodworking Recommended Products

DeWalt 735X Planer

At high speed, the planer works fast and leaves a smooth surface. But the slower, finish speed produces an almost glass-smooth surface. Knife changes are easy.

Buy at Amazon

Freud Super Dado Saw Blade Set 8" x 5/8" Bore

Leaves a dado with a flat bottom and even performs excellent on plywood and melamine.

Buy at Woodcraft

Starrett 12-in. combination square

This accurate, robust, well-machined, easy-to-read combo square is as great as ever.

Buy at Amazon