The Side Winder SW350 accepts the common 3-1/2-in.-dia. motors from fixed-base routers and combo kits.(The SW420 accepts larger models but costs $100 more.) What’s unique about the Side Winder is how fine adjustments are made. Instead of a removable crank handle that’s inserted through the table plate, the Side Winder uses a sidemounted crank. Unfortunately, the flexible shaft that runs from the crank to the lift adds a degree of play and stiffness to height adjusting that I didn’t care for. For fast height adjustments, the SideWinder uses an L-shaped wrench that fits through the top plate, locks, and lifts or lowers the motor to get the bit height close. Then you use the side crank to dial in the setting. The wrench saves a lot of cranking but I found it awkward to use.
Easy access. The adjustment handle on the Side Winder lift can be placed close at hand, but it is a bit stiff and jerky in use.
Fine Woodworking Recommended Products
Veritas Wheel Marking Gauge
A wheel-type gauge is the easiest to use, and this wonderful Veritas model is a steal at $38.
These clamps can handle glue-ups between 10 in. and 36 in. wide, and boards up to 3 in. thick. Sliding feet attach to the lower bars with magnets, letting you position them quickly for stability on any surface. The spring-loaded jaws adjust easily, dropping into notches along the bars. And the powerful clamp handles clear the benchtop.
With its graceful curves, cabriole legs, and ornamental back splat, a Queen Anne side chair is a bucket list build for many woodworkers. Dan Faia had a very specific Queen…
Become an UNLIMITED member and get it all: searchable online archive of every issue, how-to videos, Complete Illustrated Guide to Woodworking digital series, print magazine, e-newsletter, and more.
Log in or create an account to post a comment.
Sign up Log in