Tools & Materials
Woodhaven - EZ Lift Router Lift
Lift is constructed from aluminum track, phenolic parts, and screws
Oct 24, 2013
Needed to Adjust Vertical Alignment
Street price: $237
Source: woodhaven.com
Vertical misalignment: 0.016 in.
Vertical play: 0.019 in.
Insert ring alignment: −0.000 in.
Out of the box, the Woodhaven lift had too much vertical misalignment, but the lift is constructed from aluminum track, phenolic parts, and screws. This means that you can adjust the vertical alignment. The throat inserts were easy to use, as they snap into the opening and are held in place by an O-ring.
Fine Woodworking Recommended Products
Rockler Deluxe Panel Clamp
These clamps can handle glue-ups between 10 in. and 36 in. wide, and boards up to 3 in. thick. Sliding feet attach to the lower bars with magnets, letting you position them quickly for stability on any surface. The spring-loaded jaws adjust easily, dropping into notches along the bars. And the powerful clamp handles clear the benchtop.
Veritas Micro-Adjust Wheel Marking Gauge
The adjuster runs through the beam from a small knob at the back end right to the cutting wheel, which moves in and out as you turn the knob. This arrangement works well but makes adjustments a two-handed operation, requiring a little more effort.
Tite-Mark Marking Gauge
These gauges can be easily and precisely adjusted with one hand, which allows you to set the tool while holding a ruler or workpiece in the other. The quality is exceptional, and all have sharp cutters that offer great visibility.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
Log in or create an account to post a comment.
Sign up Log in