Table Saw Sled Makes Safe, Precise Cuts At Any Angle

Like a lot of ideas, this simple but very adaptable tablesaw sled is a hybrid of several others. I don’t know of another sled that is as versatile, accurate, safe, and simple to make. Whether you are making tapered legs or irregularly shaped workpieces of any kind, this sled can do the job.

It’s made from a leftover scrap of high-quality plywood with a matrix of holes drilled in it, each counterbored on the bottom to accept T-nuts. The T-nuts accept the 1⁄4-20 threaded rods I use to to create simple hold-downs on top. Underneath, there is a runner made of UHMW plastic sized for the miter slot on my tablesaw. A hardwood runner will also work. Because the sled is made in the usual way—oversize and trimmed with an initial pass on the saw—there is a zero-clearance edge that shows you exactly where the blade will cut. Position the clamps as needed, line up your layout marks with that edge, and make perfect cuts right on the line every time. You can make the sled any size; if you have an outfeed table just make sure you have a clearance slot in it for the long miter-slot runner.

— Bill Lindenfelser, Rochester, N.Y.

Drawings: Dan Thornton

From Fine Woodworking #272

Fine Woodworking Recommended Products

Hedgehog featherboards

The Hedgehog's unique spiral shape and single knob make it easy to set up and fast to adjust.

Buy at Amazon

Woodriver Circle Cutting Jig

The WoodRiver circle jig, which produces cuts up to 32-1/2 in. dia., and I can confidently recommend it. Unlike similar jigs that can pop off of their pivots mid-cut, ruining a panel in the process, this one has a robust pivot point that registers securely in the jig and workpiece.

Buy at Amazon

Double Sided Tape

A thin woven core makes XFasten tape strong yet not too thick (0.008 in.), and helps it hold powerfully without being difficult to peel off.

Buy at Amazon