Jigs for Routing Perfect Curves

Synopsis: Pattern routing is a good way to add curves to your furniture, especially when a piece requires multiple identical parts. The right jig can ensure that you use this technique safely and effectively. Here, Bob Van Dyke shows how to make and use some of his go-to jigs: a reusable jig for gentle curves, a half-pattern for tight curves, and a template that attaches directly to the workpiece. Also included is a look at the various types of pattern-routing bits.

Incorporating curved parts into your work expands your design possibilities dramatically. Although curves can be achieved with hand tools, pattern routing with a router table may be a better option, especially if you must make numerous identical parts. With this technique, parts are attached to a shaped pattern that rides against a bearing-guided router bit, letting you duplicate parts quickly and easily.

There are different styles of jigs to choose from. Your choice hinges on how frequently you expect to use it, how you’ll secure the workpiece, and, most importantly, the steepness of the curve you are routing and whether it has dramatic grain changes.

Watch a replay of Bob’s
webinar or pattern routing

Routing uphill (against the grain) can cause tearout, so avoid it when you can. Climb-cutting, moving the workpiece left to right, should always be avoided as it risks losing control of the workpiece and drawing your hand into the cutter. With the right jig, you’ll always be able to rout safely, from right to left, while cutting entirely downhill (with the grain) or uphill only on shallow curves. For more on router table safety and feed direction, see my Fundamentals “Getting started with router tables,” (FWW #270).

Use solid wood for the master pattern

Whichever jig you’re using, you’ll need a master pattern shaped to the part you need. This master generates the plywood jig that will be used to make the actual parts. While I prefer durable Baltic-birch plywood for the jig, I like thin pine or poplar for the master because these woods are easy to shape with hand tools. Refining curves with hand tools like a spokeshave or compass plane is usually better than using a spindle sander because, with the sander, it is all too easy to make parts that seem to have a fair curve but actually have lumps that will transfer to your furniture part. It’s much easier to produce a smooth, fair curve with a spokeshave or compass plane. Make sure to account for joinery locations in the master. When the master is done, turn to the actual shaping jig.

From Fine Woodworking #283

To view the entire article, please click the View PDF button below.

	The Best Bits for Pattern-Routing by Steve Latta For flawless results, pick the right cutter and bearing for the job
	Router table basics by Bob Van Dyke Get the most from this workshop workhorse
	Router Table Fundamentals with Bob Van Dyke How to Use a Router Table A router in a table is often simpler and more stable to use than a handheld router.

Fine Woodworking Recommended Products

Double Sided Tape

A thin woven core makes XFasten tape strong yet not too thick (0.008 in.), and helps it hold powerfully without being difficult to peel off.

Buy at Amazon

Milwaukee M12 23-Gauge Cordless Pin Nailer

This tool is designed for convenience. The battery and pins are easy to load, and the safety lock operates with the same finger you use to pull the trigger. The depth of set is adjustable, there’s a work light, and there’s a hook for hanging the tool on your toolbelt. A gauge lets you keep track of when you’ll need to recharge.

Buy at Amazon

MicroJig Matchfit dovetail clamps

These unique clamps have angled tips that hold templates and fences in place without getting in the way.

Buy at Amazon