New Laguna bandsaw fence does it all

While the Laguna DriftMaster DXIII isn’t cheap at $350, it promises unmatched accuracy and versatility, and attaches to almost any bandsaw, old or new, from 14 in. to 24 in. The DXIII is a very robust piece of equipment, with a rigid 7-1⁄4-in. fence, tall enough for the largest resaw cuts. The fence also attaches in a low-profile position. A rack-and-pinion wheel system makes fine adjustments easy, and the wheel can be disengaged for larger moves. There are also stops for common fence positions. And when your blade starts to dull, the DXIII offers toolless angle adjustment for drift. Learn more at LagunaTools.com.

Better casters for workbenches and more

JessEm’s new Multi-Purpose Caster Set ($162) arrives with the casters pre-assembled. They attach easily to workbenches, tool stands, and more, mobilizing them for better use of your shop space. What makes these bolt-on casters stand out from the competition is a two-point pivot system that makes them easier to engage. A set comes with two larger fixed casters, and two swiveling casters with slightly smaller wheels. Go to JessEm.com to see them in action.

Smart push pads with a positive hook

On my jointer, table saw, and router table, I often team up one push pad with a shopmade push stick, which has a hook on one end to help me give the workpiece a positive push. The DuBois 51049 Easy Grab Push Block has a drop-down hook at both ends, which can be engaged as needed to grab the end of a workpiece. At just $26 each, one of these handy blocks is a good addition to any shop. Go to PowertecProducts.com.

Fine Woodworking Recommended Products

Sawstop Miter Gauge

It has a toothed angle-setting rack that is extremely solid, accurate, and easy to use, and it offers all of the features I love in a miter gauge, including the ability to add an auxiliary wood fence, and a flip-stop that will accommodate it.

Buy at Amazon

Veritas Wheel Marking Gauge

A wheel-type gauge is the easiest to use, and this wonderful Veritas model is a steal at $38.

Buy at Lee Valley

Veritas Micro-Adjust Wheel Marking Gauge

The adjuster runs through the beam from a small knob at the back end right to the cutting wheel, which moves in and out as you turn the knob. This arrangement works well but makes adjustments a two-handed operation, requiring a little more effort.

Buy at Lee Valley