Faced with a mountain of home-improvement projects, John F. Matousek devised a technique for producing a large number of loose mortise-and-tenon joints. He designed a machine to make accurate cuts that is also easily adjustable. Detailed project plans will help you reproduce this shopmade tool with off-the-shelf parts. The horizontal mortiser is designed for joining 3/4-in-thick workpieces; it can be modified for other uses. It uses a solid-carbide, 1/4-in spiral upcut bit, and is powered by a standard 1-1/2-hp router. The machine has two movable tables and can be used it also as a conventional router table. A detailed exploded drawing shows how it was built and how it works.

From Fine Woodworking #141

Fine Woodworking Recommended Products

Starrett 4" Double Square

Head is easy to remove, replace, and lock down; narrowest blade, at 5⁄8 in., made it easier to fit into tight places; hard to read under bright lights.

Buy at Woodcraft Buy at Amazon

Leigh D4R Pro

The D4R Pro is Leigh’s flagship jig. Like the other Leigh jigs in our test, it represents a different world of quality, from its clear, comprehensive instructions to its ingenious engineering, impeccable manufacturing, and unmatched capabilities.

Buy at Amazon Buy at Woodcraft

Pfiel Chip Carving Knife

Great to use as a marking knife for laying out joinery and easy to sharpen.

Buy at Amazon