Shop Tips
How To Build a Horizontal Router Table
This easy-to-build table cuts tenons fast and accurately
Simple to build and easy to use, the horizontal router table detailed in this article provides an accurate method for cutting tenons in almost all situations. With Ernie Conover’s step-by-step instructions and detailed project plans, you can build this router table in about two hours. It is constructed with biscuit joints, and it has a swing arm and adjusting screw block. The end product is accurate and small enough to be stored out of the way.
From Fine Woodworking #147
Fine Woodworking Recommended Products
Double Sided Tape
A thin woven core makes XFasten tape strong yet not too thick (0.008 in.), and helps it hold powerfully without being difficult to peel off.
Sawstop Miter Gauge
It has a toothed angle-setting rack that is extremely solid, accurate, and easy to use, and it offers all of the features I love in a miter gauge, including the ability to add an auxiliary wood fence, and a flip-stop that will accommodate it.
Incra Miter 1000HD
One of many extremely accurate Incra miter gauges, this model offers 180-degree adjustment to 1/10 of a degree, and a long, straight fence with a telescoping stop system.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
Download FREE PDF
Comments
I've continued reading over this PDF several times and cannot find measurements for the diameter of the holes
The hole for the router bit needs to be a little larger than the largest router bit you'd use. The hole for the vac hose needs to be sized to fit your vacuum hose. The notches in the base need to be large enough to provide clearance for the router bit and to allow airflow down to the vacuum hose. Their size isn't at all critical, though.
I have built and use this table and really like how it handles tenons as well as wood chips. The one issue I have is that the weight of the router keeps the swing arm from staying in contact with the edge of the tabletop. My solution is to support the top of the router against the workbench top, which creates a tedious back and forth series of adjustments. Has anyone found another way to support the router/swing arm more securely against the tabletop edge/box side?
Maybe an aluminum router/swing arm would be more rigid.
Log in or create an account to post a comment.
Sign up Log in