Synopsis: Bench-size midi-lathes make cost and space less of an issue than in the past when deciding whether to add a lathe to your shop. In this article, students at the School of Art and Design at Purchase College tested five midi-lathes for a semester to assess power, length, speed control, and parts. Here are the specs on each one they tested and their evaluations of how each tool performed under real-world conditions.

A lathe can make most good shops even better. A woodworker can add considerable appeal to a furniture piece (depending on the style) by including turned parts, such as legs, knobs, spindles and pedestals. Other turned items, such as bowls, plates and boxes, stand fully on their own merits.

Many woodworking shops, however, don’t have a lathe—most likely because of cost or space. Lathes require cash, something many of us don’t have in surplus. And lathes take up a lot of space, something most shops have little of, if any, to spare.

But the arrival of a new category of small lathes has made cost and space less of an issue. Introduced in the late 1990s, these machines—often called midi-lathes—are generally bigger and beefier than the so-called minilathes, yet they’re smaller than full-sized machines. Midis are affordable—selling for between $285 and $350—and take up very little space. Plus, when not in use, most can be picked up and stored out of the way, although a couple of the heavier models might best be moved by someone who spends regular hours at a gym.

Midi-lathes have other features that appeal to me. Unlike minilathes, the midis include some qualities normally found only on bigger machines, such as 1 ⁄2-hp motors and spindles with 1-in. by 8-tpi threads and #2 Morse tapers. Also, when used with an optional bed extension, a midi can turn long spindles between centers.

For someone unsure whether wood turning is going to be worthwhile, a midi-lathe just might be the best way to test the waters. Not only are the midis relatively inexpensive, but they also have enough power to do some serious work. And as your turning skills grow, you can grow the lathe by adding a bed extension. So midi-lathes have a lot going for them. But how well do they work?

From Fine Woodworking #158

For the full article, download the PDF below:

Fine Woodworking Recommended Products

Forrest Woodworker II Blade

A high quality, staple blade for your table saw. With 48 teeth, it is suitable for both ripping and crosscutting.

Buy at Amazon

Stanley Powerlock 16-ft. tape measure

With its smooth lock, tough case, compact size, and excellent accuracy, this Stanley tape is perfect for workshop use.

Buy at Amazon

Rockler Dust Right 650 CFM

While all five of the smaller units will collect chips efficiently when deployed properly, the 3/4-hp Rockler was just a bit more powerful in our suction test.

Buy at Amazon

View PDF