Often used in pairs or in conjunction with benchdogs or clamps, the venerable holdfast is like having a third hand to help hold a workpiece against a bench for tasks such as planing, chiseling, and carving. And it will hold any shaped piece, from flat panels or tabletops to curved and carved cabriole legs (for more on using holdfasts, see Holding Your Work FWW #155, pp. 79-80).

Gramercy Tools recently introduced an L-shaped, forged-steel holdfast that fits 3/4-in.-dia. holes. The holdfast is tough, and at $17 ($30 for a pair), it’s a great value. However, if you have storage cabinets below your benchtop, you may have to cut the shaft to fit (not recommended by the manufacturer) or remove the cabinets.

The holdfasts are available from www.toolsforworkingwood.com.

Fine Woodworking Recommended Products

Blackwing Pencils

If you've listened to Shop Talk Live, you've heard them talk more about these pencils than you could possibly imagine.

Buy at Amazon

Rockler Deluxe Panel Clamp

These clamps can handle glue-ups between 10 in. and 36 in. wide, and boards up to 3 in. thick. Sliding feet attach to the lower bars with magnets, letting you position them quickly for stability on any surface. The spring-loaded jaws adjust easily, dropping into notches along the bars. And the powerful clamp handles clear the benchtop.

Buy at Amazon

Jorgensen 6 inch Bar Clamp Set, 4 Pack

Small light-duty clamps are best bought in quantity. These clamps are a great balance of affordability and quality—so stock up!

Buy at Amazon