For certain tablesaw cuts, such as ripping narrow stock, a featherboard can go a long way toward improving safety and accuracy. Unlike other commercial featherboards, which lock in the miter slot, the Magswitch Pro Magnet Featherboard mounts in an instant anywhere on the saw table. Adjusting or removing it is just as easy.

The secret is a pair of magnets that are activated or deactivated simply by turning a knob. Butt the Magswitch against the edge of the stock (the featherboard must be in front of the blade), apply sideways pressure to bend the thin fingers slightly, then turn on the two magnets to lock it in place.

The Magswitch worked well and is a convenient safety accessory for any shop. The pro model sells for $50 at www.woodcraft.com (a standard version with smaller magnets sells for $38). Magswitch will soon offer a model for those who cut with the rip fence on the left side of the tablesaw blade.

Photo: Thomas McKenna

Fine Woodworking Recommended Products

Stanley Powerlock 16-ft. tape measure

With its smooth lock, tough case, compact size, and excellent accuracy, this Stanley tape is perfect for workshop use.

Buy at Amazon

Rockler Deluxe Panel Clamp

These clamps can handle glue-ups between 10 in. and 36 in. wide, and boards up to 3 in. thick. Sliding feet attach to the lower bars with magnets, letting you position them quickly for stability on any surface. The spring-loaded jaws adjust easily, dropping into notches along the bars. And the powerful clamp handles clear the benchtop.

Buy at Amazon

Tite-Mark Marking Gauge

These gauges can be easily and precisely adjusted with one hand, which allows you to set the tool while holding a ruler or workpiece in the other. The quality is exceptional, and all have sharp cutters that offer great visibility.

Buy at Lie-Nielsen Toolworks