Accessories - Page 58 of 91

Hanging Rip Fence
October 25, 2005

Removing and then reinstalling the rip fence from my saw each time I crosscut a long board was time-consuming and awkward. My solution was to cut the rear rip-fence guide…
One-Minute Taper Jig
October 25, 2005

I use a jig to taper a guitar's fingerboards, but the jig could be adapted to table legs or any short tapering job. The limiting factor is the length of…
Combination Router-Table Bit Guard and Stops
October 25, 2005

I added two 3-in.-wide, 15-in.-long pieces of hardwood to the fence of my router table. Each piece is mitered on the end closest to the bit and attaches to the…
Mitering Frames on the Tablesaw
October 25, 2005

Much of the furniture I make is based on mitered frames, which require corners that have to meet perfectly. To make these frames, I use a sliding table jig on…
Router Table Attachment for Tablesaw
October 25, 2005

When I began thinking about a router table, it soon became apparent that finding a home for a large, occasionally used table would be a problem in my crowded basement…
Scissor Jack Router Lift
October 25, 2005

After looking through catalogs and saving my pennies, I finally located the perfect plunge router for my router table or so I thought. After mounting it in the table, it…
Improved Taper Jig
October 25, 2005

The tapering jig I use for short runs is just as quick to make as Phil Dark's (Fine Woodworking #98, p. 20), but it also handles longer workpieces and provides…
Jointing on the Table Saw
October 25, 2005

I needed to joint the edge of a 1-1/2-in.-thick tabletop laminated up from two pieces of 3/4-in. particleboard. The piece was too long and unwieldy for my jointer, and I…
Sliding Miter-Gauge Fence
October 25, 2005

I added a sliding fence to my tablesaw's miter gauge to enable it to perform like the gauges found on many European power tools. With a sliding fence, you can…
Straight Line Ripping Fixture is Fast, Accurate
October 25, 2005

Here's a fixture I built for keeping work tight against the tablesaw's fence. It allows accurate, fast ripping in production situations. The heart of the fixture is a common wheel…

Page 58 of 91 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Accessories - Page 58 of 91

Get the latest from Fine Woodworking Magazine

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.