Shop Storage And Furniture - Page 17 of 35

Quick Tip: Perfectly clean benchtop
October 21, 2011

To start each project with a perfectly clean benchtop, I use a roll of kraft paper, a knife, and a stapler. Roll out and cut the paper so that it…
Honing the Inside Bevel of a Gouge
October 21, 2011

Here’s a simple way to sharpen or hone the inner flute of a carving or turning gouge. Start by ordering a set of contoured profile sanding grips (available from Rockler…
A Water Supply in the Shop
October 21, 2011

I needed a water supply in my shop but found it wasn’t practical or costeffective to extend the household plumbing. Instead, I installed a plastic 15-gallon drum on a very…
Adjustable Table Saw Outfeed Table
October 21, 2011

An outfeed table with an adjustable top lets you quickly re-level the surface to match the saw’s height.
Quick Tip: Cleaning tip for glue bottle tip
September 20, 2011

If you’re tired of cleaning dried glue out of the tip of your glue bottle and waiting for glue to ooze down to the nozzle, leave the bottle inverted. After…
Space-Saving Stand for a Sliding Compound-Miter Saw
September 19, 2011

Sliding chopsaws take up a lot of room in a shop, primarily because you need to leave plenty of space behind the saw. This pull-out saw stand opens on ordinary…
Pop-On Table Makes Plywood Easy to Cut
May 20, 2011

To handle large, unwieldy sheets of plywood on the tablesaw, I use this simple pop-on infeed table. The table features a lip on the front that slips into the channel between the…
Keep Your Glue Bottle, Brush, and Lid in One Place
May 20, 2011

This idea is simple but very handy. It’s just a cap from a Sharpie felt-tip pen taped to the side of the glue bottle. The hole in the cap holds…
Benchtop Caddy is Great for Sandpaper Sharpening
March 17, 2011

I use wet-or-dry abrasive paper on glass for sharpening. But storing the different components separately was making the process inefficient. So I made this simple caddy that holds four pieces…
Magnetic Lid Lifter Keeps Finish Off Your Hands
March 17, 2011

Here is a handy way to lift off and replace the lids of paint and varnish cans without getting the gooey stuff on your fingers. Just glue a small magnet…

Page 17 of 35 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Shop Storage And Furniture - Page 17 of 35

Get the latest from Fine Woodworking Magazine

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.