Woodworking Jigs - Page 22 of 94

Clamping System for Cross-Grain Planing
July 19, 2011

I do not have a planer or jointer, and most of my projects start with rough lumber. This means I do lots of handplaning across the grain to set the…
Another Way to Bevel Curved Panels
July 19, 2011

Here is an alternative to the jig Geoffrey Carson constructed for his article “Curved Bevels Made Easy” (FWW #217). My jig is easier to make and use, and is adjustable.…
Extra Clamp Pressure for Dovetail Joints
July 19, 2011

When assembling my hand-cut dovetail joints, I like to leave the pins just a touch long and trim them flush later. But this makes it difficult to clamp the joint.…
Turn Your Lathe Into a Disk Sander
July 19, 2011

Start with the sanding disk. Mount a square piece of 2x12 or a plywood lamination to a steel faceplate. Turn the disk to 9-in. dia., flatten the face, and mount…
Tighten Clamps in Close Quarters
July 19, 2011

You can make it easier to tighten F-style or hand-screw clamps with this simple modification. Drill a hole in the end of the wooden handle to fit a 1⁄4-in. drive…
Simple Jig Aligns Table Saw
July 18, 2011

You can’t cut cleanly or safely on the tablesaw if the blade is not aligned with the miter slot and fence. However, with a shopmade jig and an inexpensive dial-caliper…
Taper Jig Combines Bandsaw and Planer
July 7, 2011

This jig makes tapered parts accurately and safely. To begin, cut the workpiece to size, making sure all the face and end surfaces are planed flat and square. Then cut…
How to Soup Up Your Crosscut Sled
July 2, 2011

Fresh faces and smart stops make a big difference
Quick Tip: Throat plate repair
May 23, 2011

A zero-clearance tablesaw throat plate will wear through over time, widening the space next to the blade. Rather than making a new insert, just use an automotive body filler, like…
Router Jig for Fluted Posts and Trim
May 20, 2011

With this simple jig, you can make a fluted post or pilaster door trim in any size or dimensions. Start with a piece of 1⁄2-in.-thick Baltic-birch plywood as wide as…

Page 22 of 94 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Woodworking Jigs - Page 22 of 94

Get the latest from Fine Woodworking Magazine

#315-JAN/FEB 2025

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.