Woodworking Jigs - Page 25 of 93

Protect Your Router Bits with a Custom T-Drawer
July 29, 2010

Learn how to build a custom storage device that will protect and organize your router bits.
Use a Long Push Stick When Ripping Narrow Boards
July 29, 2010

Q: Is it safe to rip 1/8-in.-wide strips between the rip fence and blade? Ed Pirnik, Stamford, CT A: With the right push stick, it’s a safe cut. Make the…
Push stick stands at the ready
July 21, 2010

At my small commercial shop, we removed the factory tablesaw guard and installed an over-arm blade guard for safety reasons. Even so, the battle between the blade guard and rip…
Quick way to set a plunge router to cut hinge mortises
July 21, 2010

While reading the April 2010 issue (FWW #211), I noticed how Doug Stowe set his router bit to the correct depth to cut a hinge mortise. Here’s another way that’s…
No-pinch vise handle
July 21, 2010

My bench vise is a substantial cast-iron model with a beefy metal handle. When the handle drops vertically, it is not only noisy but also painful if your fingers are…
No-fuss jig dials in caliper settings while turning
July 21, 2010

Any turner will tell you that turning a spindle requires lots of caliper settings. To ease this process, I came up with this double-duty V-gauge. To make the gauge, cut…
Jig holds burnisher at proper angle
July 21, 2010

I recently purchased a scraper plane with instructions that call for sharpening the blade with the burnisher held 15° from horizontal. I quickly discovered this is easier to write than…
Vise Insert Prevents Racking
June 18, 2010

This simple device helps keep your bench vise in perfect alignment
Build a Vise Spacer for Your Workbench
June 10, 2010

Get a grip on your work without racking your workbench's most precious asset.
Make two-sided tapers more safely
May 26, 2010

My favorite project for new woodworking students is a Virginia side table because it introduces them to most of the tools they are likely to encounter in a shop. The…

Page 25 of 93 Previous

UNLIMITED membership - Get access to it all

Start Free Trial Upgrade Membership

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.

Woodworking Jigs - Page 25 of 93

Get the latest from Fine Woodworking Magazine

#314-Tools & Shops 2025

#313-NOV/DEC 2024

#312-SEPT/OCT 2024

#311-JULY/AUG 2024

#310-MAY/JUN 2024

We hope you’ve enjoyed your free articles. To keep reading, become a member today.