Woodworking Jigs - Page 76 of 93

Here's a router-table technique for producing clean, precise pocket holes for joining face-frame members. First, construct a wooden cradle fitted with a lever-operated toggle clamp. The cradle angles the workpiece…

Here's a quick, simple way to attach a bowl blank to the lathe. The method requires a faceplate larger than the finished bowl. Start by screwing the square bowl blank…

This method provides a quick and accurate setup for jointing the edges of stock with a router. Make a two-piece jig that consists of an alignment fixture and a fence.…

I removed the guides (tool rests) that came with my grinder and replaced them with a single piece of steel angle that spans both wheels. I use this guide for…

This router table is quick to set up and hangs on the wall when not in use. A plunge router attaches to the table's underside using the rods provided for…

For years I used a doweling jig to drill holes for pins in extension tables and leaves. This approach, unfortunately, requires dozens of separate operations, each subject to the error…

Cut tenons and sliding dovetails with an MDF jig that clamps to your workbench

Cut mortises and angled holes with these easy-to-make jigs

Put a perfect grind on your spindle and bowl gouges

Don't adjust that bit. Shopmade accessories do the work safely and efficiently.