Replies

1. 
   jharveyb | Oct 04, 2024 11:11am | #1

   make square base for router.
   attach strip of wood to one edge of base with double sided tape to create desired angle.
   clamp straight edge to work to guide router.
   best to include an end stop instead of just eye-balling it.
   finish end with sharp chisel.

   using a plunge base will allow you to move router in correct direction to keep base against fence.

2. 
   bc57 | Oct 04, 2024 02:30pm | #2

   Thank you, will give it a try

3. 
   MichaelDEllis | Oct 05, 2024 05:11pm | #3

   I made guides for my router when I built a shoe cabinet for a customer with angled dados.

   
4. 
   joeleonetti | Oct 06, 2024 06:27pm | #4

   Depending on how many or how long, you could use a chisel and mallet and then clean bottom with a router hand plane. Not that hard to do. It’s actually kind of fun.