Are there any inexpensive sources for Acme threaded rods and nuts?
blaytonii
| Posted in General Discussion on
I am considering trying to construct my own vises for a workbench but all the sources I see are substantially more expensive than even high-end, name-brand vises (LN and LV). Looking for 1.25-4 or 1.25-5 threaded rods and corresponding nuts. So far I’ve found 36″ lengths for $350-$400 , and 10-12 ft lengths for $60/ft. The $75 Woodriver screws from Woodcraft are looking better and better…
Replies
A while back, I was interested in making a Moxon vise for elevating dovetail boards on my bench. Here are some links I ran across--they may be less expensive than what you've found. Good luck. Tom
http://www.surpluscenter.com/Power-Transmission/ACME-Thread-Lead-Screw-Nuts/ACME-Thread-Lead-Screws/1--4-X-36-ACME-LEAD-SCREW-1-2983-100-3.axd
http://www.mcmaster.com/#general-purpose-acme-rods/=pr6gj1
This forum post is now archived. Commenting has been disabled