Bandsaw Christmas Present – Recommend
I’m hoping that all you woodworkers can help this non-woodworker buy a nice Christmas present for my husband. I’d like to get him a bandsaw, at least 14″, but maybe 16″, though I’m pretty uneducated about the pros and cons of different sizes, much less brands. I tried doing a search of the forum, but for 2005 I mostly found complaints that the Tools review by FWW wasn’t that good with bandsaws and a couple of recommends for Grizzly and Rikoh (and some that didn’t like Rikoh, so I was more confused). I could go to my husband, but for once (just once) I’d like to surprise him. He will be using it mainly for the ‘usual’ stuff: boxes, legs, occasional resawing.
I’ve been looking at the Grizzly because my husband likes his Grizzly jointer. But I’m confused because the 1 1/2 hp 14″ is the same price as the 2hp 16″, (actually it’s $100 less right now during the holiday sale). But is there a reason why I should get the 14″ over the 16″? He really likes his Jet tablesaw as well – how are they on bandsaws? Can you all see how clueless I am about power tools, so can you guys and gals guide me? Any suggestions on what you like best, and why? What would you tell your spouse to buy you if you were picking? What other stuff should I get with it? My forum search turned up that a Timberwolf or Wood Slicer blade would be good to get for resawing. What about for regular use?
Thank you very much from somebody who always looks at my husband’s copy of FWW and marvels at the artistry in wood displayed there.
Replies
Aimless,
First of all, you certainly don't seem 'aimless' -- you have a definite goal and have come to the right place for answers.
I've had a G0513 Grizzly 17" bandsaw for about 14 months now and am completely satisfied with it. I got it for its 12" resaw capacity along with the other standard features. It's on sale now, so that makes it an even better buy.
Since you mentioned resaw, the blade that works best for me is the 1/2" Woodslicer from Highland Hardware. A lot of people like the Timberwolf 3/4" blade, but I've had better luck with the Woodslicer. I'd stay away from Grizzly blades, if I were you.
Good luck!
Bill Arnold - Custom Woodcrafting
Mensa Member
Click Here if you're interested in a good, inexpensive website host.
Food for Thought: The Ark was built by amateurs; the Titanic by professionals.
How much do you want to spend? Both the Powermatic and Jet 14" band saws are nice. I have the Powermatic and love it. With a riser block, these saws can resaw 12" borads or logs.
aimless,
I'm not sure what your budget limit is, but if you want to get him a great bandsaw, I would suggest the Powermatic 14". I've been using this model for a while now, and it is impressive. It has a lot of great features that are usually upgrades on other machines. However, it is around $800-$900, depending on the sale you find at the time.
I wrote a review of the Powermatic here on Knots. Here's a link:
http://forums.taunton.com/tp-knots/messages?msg=25964.6
I'd be glad to answer any specific questions you have on this tool!
Aimless,
First, do you have a sister?
How are you going to keep a large item like a bandsaw a surprise? I have a suggestion, its only a suggestion. Wrap up a picture of the bandsaw you are planning on purchasing and give it to him in a box. This way, he understands the gift, but if its not exactly what he wants you can order something different. He will still be happily surprised. By the way, the Minimax (sp?) machines get very good ratings from owners on this site.
Good luck,
Wolfman
" Wrap up a picture of the bandsaw you are planning on purchasing and give it to him in a box. "
Wolfman,
I had to do this one Christmas when I bought him a large gift that was delayed at the last minute (I had ordered it several months in advance, but the company screwed it up). While it was cool, it just wasn't as much fun as having it right there so you can go out to the shop and set it up on Christmas afternoon and present your wife with a piece of scrap that you've cut on your brand new toy. Luckily, I have a place that I can hide the thing, so I'm not too concerned about that. Thanks for the suggestion, though. It's probably the smart thing to do because then he can get exactly what he wants. And I did do that with the jointer, but just this once I want to surprise him with the tool out of the blue and have it be a good one.
I've seen the Minimax in reviews on the forum, but I had never heard of it, and the prices I saw were a little out of the range I'm looking at. I'm hoping to spend under or around $1000, though I'll go over a bit if it's the difference between really nice and great.
Thanks for your help,
Aimless
Thanks to all of you for your help. I'm going to go back and check out the specs on the various saws I was considering to look for cast iron wheels and make sure they have a good fence. Then I think I'll probably end up at our local woodworkers' supply (small mom and pop place) and see what they have there.
I looked at the Powermatic and I'm trying to figure out why there's such a great price differential with other Bandsaws. Is it a better motor, or is it easier to use somehow?
Thank you all.
"I looked at the Powermatic and I'm trying to figure out why there's such a great price differential with other Bandsaws. Is it a better motor, or is it easier to use somehow?"
It's a lot of little things - quality motor - cast iron wheels - Carter bearing guides - detensioning bar (huge plus) - table extension - fence included - perhaps heavier sheet metal - higher grade finish - etc.
Sort of like the difference between a Toyota and a Lexus - both sedans - both quality - both drive you in relative comfort - one's just a bit more luxury and more luxury items come standard.
In general, Powermatic seems to be pricier than other comparable machines, even the Jets which are in the same group (WHM Tool Group). Funny thing is, some of their machines actually have some design quirks that folks don't really care for. Who knows....
Don't know if you could go more around $1300, but I think the new and improved Jet 18" saw deserves serious consideration. See what your "mom & pop" folks have to say about availability on that one! If he were my hubby, I'd be lookin' at the new Jet, or the Grizzly G0513. Don't know much about the various Delta models. My experience has been more with Jet and Grizzly.forestgirl -- you can take the girl out of the forest, but you can't take the forest out of the girl ;-)Another proud member of the "I Rocked With ToolDoc Club" .... :>)
forestgirl,
Have you actually used a Grizzly bandsaw?
I have, what do you want to know? I posted a review (my personal experience) here some time ago with pic's. If you are looking to purchase one, just let me know, I can provide more details.
bones,
I don't need a review. I'm happy with the Powermatic. But you should post a link to your review here.I think it's important for people to only comment on machines they actually own and use. This is especially important when giving advice to a prospective buyer.I just wasn't sure if Forestgirl actually owned a Grizzly bandsaw. Her post implies that she has experience with it. Still not sure.
Edited 10/27/2005 9:50 am ET by MatthewSchenker
Here is my original post on the Grizzly BS. My opinion has not changed so I'll let it stand without modification. I apologize for the original pictures size. I had not been properly educated yet to the importance of posting small pics. Anyway here it is again
http://forums.taunton.com/tp-knots/messages/?msg=17846.1
My post with pics is about mid way through the thread. Take care.
Bones,
Thanks so much for the link it is very helpful. I hadn't turned it up in my search because I limited to 2005 postings.
Thanks again,
Aimless
No problem I am glad it helped. At the time, I could not find a lot info on Grizzly. I looked here and other sites for feedback. In the end, the reputation of CS tipped the scale. I liked the bandsaw so much I bought the 1023SLX table saw next and then the horiz boring machine (using as a slot mortiser). I posted the pics so people could see something besides the pics in the catalog. I also mentioned any issues I found. Though the ones I did find were miniscule
Well what is the genral opinion out there of the Delta X 5 28-475 14 " band saw. I am thinking about purchasing that one.
comments?
The Delta 14" bandsaw has been the industry standard for decades. That's not to say its the absolute best 14" bandsaw, but it has outperformed its clones. It's lower blade guide is closer to the table which maintains accuracy of cut a smidge better. The table trunnions are also beefier than many of the lower priced competition and prevent flex better.
The saw comes in a number of variants, the 28-475 has the closed stand and the X5 marketing with a 1 1/2 hp. motor. There is another closed stand with a 1 hp. motor, and for a bit less there is one with an open stand and 3/4 hp motor. The basic machine--the castings and wheels and guides are all identical. More power is better than less but the need for power does depend on your usage. (These saws used to come with 1/2 and 3/4 hp motors and were widely used, even in light commercial applications.) There have been incremental improvements or changes over the years.
The X5 designation doesn't mean anything about the basic machine--still identical, but equipped differently (more hp in this case), and with a marketing package so you pay for an extended warranty and some rebate or additional tool, etc.
Aimless, I have been using my Grissly 14" BS for about 1 1/2 years now. Got it soon after it came out and it came with a fence, tention ajustment and $50. for 6" riser. About $425.00 w/shipping at that time. Some of the ajustments could use some improvement but for the price agod machine. Good Luck, Fishwood.
The Grizzly G0514 is on closeout sale at a great price. I looked it over at Grizzly HQ and it looks pretty good. I currently have the Grizzly 16". The downside to this one is that the cutting height is pretty limited, and bieing one piece of cast iron, a riser block cannot be used. It is also immensely heavy, and therefore a bear to move around (pun intended).
The latest issue of Wood magazine has a good review of "upsized" bandsaws. They name the Grizz 0513 as "Top Value" and the Grizz 0514 and Rikon as tied for "Top Tool."
As someone else has already stated, most of us only have experience with one (or maybe two) models, so can't really make a fair comparison of all the available choices. I happen to own the 0513 and have found it to be a solidly made, very capable performer. Wood's biggest complaint is that between it's aluminum wheels and (relatively) slower maximum blade speed it performed the slowest in their resaw test. Both the "Top Tools" run at a somewhat faster maximum blade speed, and the Rikon has cast iron wheels to boot. I can't argue with this, but since resawing at or near maximum capacity is something I only do occasionally it's not a major issue for me.
Other than this, the less expensive Grizz (cheapest saw in the test, IIRC) is a great tool for the money. I have no doubt the two "Top Tools" would be even better.
Edited 10/27/2005 7:50 am ET by DClark
"In general, Powermatic seems to be pricier than other comparable machines, even the Jets which are in the same group (WHM Tool Group). Funny thing is, some of their machines actually have some design quirks that folks don't really care for. Who knows...."
On the jet vs. powermatic price difference: these are different lines. Just because both are owned by the same parent company and both are bandsaws does not mean that they are the same in terms of quality and features - and therefore, in price. The examples of parent companies that offer various lines at different price points are endless from car companies to tool companies etc. In short, the Powermatics are pricier because thay have more expensive parts and features (bearing guides instead of cool blocks, larger table, iron wheels, detensioning bar, etc.) - no big mystery. If you were trying to imply that the premium for Powermatics is just a matter of paying for a logo and paint scheme, I strongly disagree.
As far as "design quirks," could you be more specific? It seems somewhat unfair to Powermatic to cast generalized aspersions. Further, aimless is asking for specific input not vague put downs.
As far as "who knows?," well, I have a pretty good idea as I own one and have used it week in and week out for over a year. I have yet to find any troublesome "quirks."
Samson,
I also would like to hear the reasoning behind Forestgirl's criticism of Powermatic, and her support of Grizzly. It is really important that we only criticize, or support, when we have actual experience. People use these discussions to make buying decisions. We, as contributors, have a responsibility in reporting our tool experiences.For the moment, I will assume that Forestgirl's comments on Powermatic and Grizzly bandsaws are based on hands-on use.Waiting for clarification.
Edited 10/27/2005 11:09 am ET by MatthewSchenker
"If you were trying to imply that the premium for Powermatics is just a matter of paying for a logo and paint scheme, I strongly disagree." No, I wasn't implying that at all. I'm fully aware that the Jets and Powermatics (whichever specific tool) are not clones. But I have my doubts as to whether the premium paid for PM is totally related to increased quality. I'm more than willing to admit, though, I could be wrong.
The mild statement "some of their machines actually have some design quirks that folks don't really care for" wasn't a major put-down of Powermatic, and I have no agenda with them at all. I'm sure you can enlighten me as to why their machines are so much more pricey that other comparable machines. It's pretty clear that "Aimless" is wondering specifically about the bandsaw. I'm wondering if the new Jet saw doesn't address some of these differences, as a matter of fact.
Since I don't have any Powermatic tools in my future ($$$$$) I haven't kept a file of things that I've heard were a little aggravating, but one did stick with me, and that's the blade guard on their table saw(s)(?), which it seems people have been complaining about for years. They finally redesigned it with the new retro-look cabinet saw that was debuted in Las Vegas this summer. They also added a riving knife-style splitter. Kudos to Powermatic on that!!! I really wanted to see that saw in Portland last weekend, but they hadn't arrived yet.
forestgirl -- you can take the girl out of the forest, but you can't take the forest out of the girl ;-)Another proud member of the "I Rocked With ToolDoc Club" .... :>)
Edited 10/27/2005 1:48 pm by forestgirl
Forestgirl,
You wrote this:
"But I have my doubts as to whether the premium paid for PM is totally related to increased quality."Where are these "doubts" coming from? You're being rather cryptic here.In any case, it sounds like you haven't actually used a Powermatic bandsaw. Have you used a Grizzly bandsaw? Aimless asked for advice that she can apply to a tool purchase. I don't think that you should be expressing "doubts" about a tool you never used. Nor should you promote a tool you have never used.Aimless, whichever machine you choose, a bandsaw is a major decision. If you're making use of customer feedback, it should come from those who actually have experience with the machine(s) you're considering.
Edited 10/27/2005 2:13 pm ET by MatthewSchenker
Samson,
I have a question for you regarding the Powermatic, and figured while I had your attention here I would ask.When you're adjusting the blade tension, do you use the bottom of the top of that nut that's in the spring housing to indicate the tension? I've been using the top of the nut. I hope this question makes sense!
Edited 10/27/2005 6:02 pm ET by MatthewSchenker
I'm not sure I know what you mean. I use the blade tension knob to adjust the tension - it's the large knob that controls the bolt that goes vertically into the spring housing. IIRC, the small knob at the base of the spring housing is to adjust the blade tracking.
I reread your question and think I get it now. I'll have to look at my saw, but I think I read from the top of the nut but frankly I don't pay much attention to literal settings as I use Viking/ Timber Wolf blades and use their flutter test to set the tension rather than the markings on the spring.
While you're looking around, don't forget Woodcraft on Fort Union or M&M Tool and Machine on 300 West 17?? South in SLC.
Don,
I was going to suggest the same thing to Aimless. Two good places to kick the tires. Literally. I'm thinking of, someday, purchasing a larger machine. I plan to give the Ricon 18" a hard look. I like the cast wheels (heavy) and the guide system. Woodcraft has it on sale through Nov. 30 for $900.00.
Chuck
Don,
Thanks, I am planning to visit Woodcraft. I didn't know about M&M tools, so thanks for the reference.
Amy
aimless,
BArnold is correct, you have as good a focus on this issue as any of us. Most of us have experience with only one bandsaw and for most its been a good experience. Let me throw in a few facts(as I see them)and maybe it'll help your focus a bit more. First, bandsaws with cast iron wheels have lower vibration and cut a bit better than cast aluminum wheels. The Powermatic has cast iron wheels as does the Ricon 18" and some of the Grizzly models. Second, for a hobbiest the 14" model with a minimun 1hp motor is adequate and will require a riser to do resawing up to 12". A larger bandsaw that does not require modification to do 10-12" resawing usually has a larger motor and makes the job easier. Third, It seems that many bandsaw deals appear in Jan.-Feb. each year....it may only be a $50-100 savings...but it's a sale. Lastly, be careful with the add-on costs....for instantce, the Grizzly now comes with a timberwolf blade but somtimes the price differential hides the fact that the saw has no fense, or the riser is quite expensive, etc.
As a 14" bandsaw, it is hard to beat the Grizzly. Larger models the ricon, grizly, jet, etc. come into play. good luck
Like Barnold, I have the Grizzly 17" BS and have been very pleased with it. For the money, you can't beat it. If you do a search on band saw you will see all the threads and there are some pics as well. Take care.
Hello Aimless,
You didn't say what your AC power requirements are? Is your husbands shop limited to only 110AC or does he have 220AC available? This will also determine what saw you may be able to purchase at this time. If he needs to upgrade your electrical to have the 220 AC you will need to figure this cost in as well.
I own the Grizzly Ultimate 14" Grizzly GO555 with riser and have been very pleased with it , I added the 6" riser block and timber wolf 1/2" blade 3TPI for resawing and does very well for my hobbyist needs. It runs on either 110 or 220. Since I have only 110 in my garage it was my best choice.
Just my .02 cents worth. BTW could you call my wife and give her some hints for me!!! A lathe maybe!! LOL:)))
Good luck and Happy Holidays .
Mike K
Edited 10/27/2005 8:59 am by MiKro
Edited 10/27/2005 9:14 am by MiKro
Edited 10/27/2005 9:14 am by MiKro
Mike,
Thanks for pointing out what could be a major oops on a tool purchase. Luckily, we have 220 in the shop and it would just be a matter of adding another outlet (since 2 tools are never in operation at the same time). If I get a rolling base for the saw then we won't even need another outlet.
Thanks,
Amy
"just be a matter of adding another outlet"
Your municipality may not consider that acceptable. I just completed an electrical upgrade, and planned two 220v circuits, with multiple outlets per circuit. Inspector required me make each 220 outlet a "home run", that is, the only outlet on a circuit that goes right to the panel.
If your breaker box isn't in the shop, you could put a subpanel in the shop and do 220's just from there.
You'll probably have to have a "means of disconnect" near the machine, as well. I've seen it asserted that a plug-receptacle combo is considered adequate, I don't know, you should ask your city inspector.
That's if you want your wiring to be checked. I decided to get inspected by the city and stay with code, because if I don't and there's a problem, my insurance won't pay. Also I figured the inspector could possibly find something that would endanger my family, the *real* reason for careful wiring.
Also as a tactical matter you'll have to install an appropriate receptacle that matches the ampacity (probably 20A or 30A) of the circuit; this in turn means the right plug has to be put on the new band saw. No big deal, but if you want him to be able to run into the shop and plug in and cut, it's a detail you'll want to sort out in advance.
I think it's awesome what you're doing for your husband. I reckon your husband's as lucky, as I am to have my lovely wife. Hope this goes very well for you both.
Thanks for your advice. We do have a subpanel in the shop, and when we had an electrician in to do the original 220 he was the one who said that adding another outlet would be an option for another tool. I assumed that he was suggesting something that would be within code. Thanks for pointing out the plug thing though, I had conveniently forgotten that there are different types of 220 plugs.
Electricity is one of those things that I just don't like to mess with - much better to hire a professional.
You are quite welcome. As it could be a major oops! I have seen it before.
Again Happy Holidays!!!
Mike K
aimless,
In my excitement about the Powermatic 14", I forgot to mention the Jet 14", which is also a great saw. I used one for a while until I replaced it with my Powermatic.
The Jet costs quite a bit less than the Powermatic, and it doesn't have a lot of the upgraded features, but it is a reliable saw.
Here's a link to a review I wrote about the Jet 14" on Amazon:
http://www.amazon.com/gp/product/B00006ANS4/103-7054444-1376633?v=glance&n=228013&%5Fencoding=UTF8&v=glance
Matthew,
Thanks for the link, it was very helpful. If you don't mind my asking, you only had the Jet for a couple of years - what made you upgrade to the Powermatic after such a short time?
Thanks,
Aimless
aimless,
I owned the Jet 14" for three years and it worked great the whole time. I used the saw for extensive resawing and ripping. I did a lot of things with that saw that most people use a table saw for!But for some reason, towards the end, the tension rod began diggin into the cast-iron housing. I tried to fix this, but eventually it dug all the way in. This might not make sense if you've never used a bandsaw, but it kind of messed up the whole tensioning system. I tried various ways to fix it, but nothing worked. I got the saw for free (long story) so I wasn't too concerned. I was about to go to a metalworking shop when someone I met offered to buy it from me. I kind of had my eye on the Powermatic, so I figured I would just do it.One of the great things about the Powermatic is the tension-release lever!
Edited 10/28/2005 10:22 am ET by MatthewSchenker
I'm extremely happy with my Laguna 14" and would recommend it to anyone (although their customer service can range from lackluster to good, depending on who you happen to reach). Comes with a very good fence, adjustable for drift, which at this point I don't think I can ever do without. I find myself routinely resawing 6-9" wide boards without a glitch.
I've heard great things about Minimax saws and their customer service. Although I talked to someone who had a 16 or 18" and he didn't like the fence, and said that blade change is difficult, but he seemed very happy with it otherwise.
The nice thing about getting the "standard" 14" design is all the accessories available that won't fit my saw or the Minimax, etc.
MiniMax and Laguna (mmmmm, yum!): aren't they signficantly over the $1K mark? t'were it not so.....forestgirl -- you can take the girl out of the forest, but you can't take the forest out of the girl ;-)Another proud member of the "I Rocked With ToolDoc Club" .... :>)
I got my Laguna a few years ago for I think a little less than 1K. That was when they still sell the 110V version, which I don't think they do anymore. I also got the stand for free for some reason. Since it was going to be my only stationary power tool, I did splurge a little.I'm still using the 3/8" blade that came free with the saw, including for resawing. I snapped the 1/4" learning to fold the thing like in the Mark Duginske book.
"I got my Laguna a few years ago for I think a little less than 1K." Wow, good deal, eh? Actually, I just checked their site and the LT14 is $995, without the stand. Color me surprised. How has their customer service been? That's always a topic of conversation (between Laguna and MiniMax). The 14" MM is $1895.
What are the primary features of yours? Cast iron wheels, or aluminum? Guides? My browser crashed before I had a chance to look. Darned firewall!
"I snapped the 1/4" learning to fold the thing like in the Mark Duginske book." Too funny (I'm sure not at the time.) Is his method the one where you stand on it with one foot and twirl your arm?? I got that one the second try I think!forestgirl -- you can take the girl out of the forest, but you can't take the forest out of the girl ;-)Another proud member of the "I Rocked With ToolDoc Club" .... :>)
Is his method the one where you stand on it with one foot and twirl your arm? I had to go to the ER!
I have a 18" RICON and I LOVE it.. I think it just got good reviews in the latest WOOD Mag. (Can I say that in here)..
Just one thing.. Get some good blades to use too! Ones shipped with most saws are junk!
EDIT:: I know you were speaking of 14 or 16 inch.. If ya LOVE him 'Get the BIG one'.. But you may never see him again once he cranks it up!
Edited 10/27/2005 10:54 pm by WillGeorge
Hello, You seem to have two choices. Choice number one would entail going the 14 inch 120V Delta, Powermtic, Grizzly, Jet etc. route. Please realise that there is an entire aftermarket industry dedicated to improving these machines. The other choice is the welded steel frame version of bandsaws such as the bandsaws made by Felder, Laguna, Scm and on and on. If you research the web you will not find much in the way of improving these machines because there is not much to improve. The tradeoff is the price of bandsaw type one versus bandsaw type two. The last time I looked most of these machines cost upwards of fourteen hundred dollars. Of this style of machine offered, the Jet and Bridgewood brand of bandsaw were running around the same price of eight hundred dollars. I would suggest that you check out the Bridgewood 17 WBS. On the surface both machines are comparable but the Bridgewood has cast iron wheels which at this price seperates it from the rest of the pack. The trade off in considering this machine is it a 220V machine and an odd size of bandsaw blade. The blades are available from Bridgewood, Timberwolf and Woodcraft. I don't think Woodslicer blades are made to fit this machine but I would stay away from these because they dull pretty fast and were made to cut fish primarily. Remember in the long run it is less expensive to buy one good machine than a cheap machine and a good machine. Good luck.
aimless ---
There are several concerns you should have:
1) Does the bandsaw have the capacity for what your husband wants to do?
2) Will the bandsaw fit in the shop?
3) Is the work height of the bandsaw proper for your husband?
4) Is there appropiate power for the saw?
I believe that the 14" bandsaws with a 6" riser has the same resaw capacity as the 16" bandsaws. I believe the tables of the 16" saws are larger than the tables of the 14" saws.
A 14" saw will fit into a small shop easier.
The 14" saws mount on a base that can be removed and a shorter base can be built for the 14" saws. The 16" saws do not have a removable base.
Most 14" saws have 110/220 volt motors. Most 16" saws have 220 volt motors.
"3) Is the work height of the bandsaw proper for your husband?"
GHR,
The Jet bandsaw we have at school has a table that is significantly lower than its Laguna counterparts. Shorter students tend to gravitate toward the Jet, while tall students avoid the Jet's low table that causes them to stoop during use.
If the user is shorter, the lower table height on the Jet bandsaws could be a big advantage. If the bandsaw is going to be placed on a mobile base, that could also be a factor.
One of the things that I appreciate about the Jet is the rack & pinion adjuster for the blade guard, which makes it safer to adjust the blade guard while the saw is running.
-Jazzdogg-
"Don't ask yourself what the world needs. Ask yourself what makes you come alive, and go do that, because what the world needs is people who have come alive." Gil Bailie
26515.1
I went to the local Sears store yesterday and saw their new 14" professional bandsaw. WOW Maybe this can be my Christmas present.
What a difference from the old model. All steel welded construction, cast iron wheels, blade dust brush, large cast iron table with micro adjustable rip fence, 1 HP fully enclosed motor, ball bearing blade guides, work light, heavy trunnion, fully enclosed stand and rack and pinnion blade guide adjustment.
After having bought the 22124 ( top of the line) Craftsman Professioal table saw about seven months ago and being quite happy with it, I was wondering if Sears is upgrading their entire power tool line.
I'm thinking seriously about buying this new band saw. It is selling for $ 449 which includes a $ 50 sale discount. Home delivery is about $50 extra.
Does anyone out their have any futher info about this saw? Who is the manufacturer? It looks a lot like a Rikon, except that you get the fence as standard instead of paying an extra $59 dollars for it. I'd like to get some feedback before I buy it.
Dustmaker1
This forum post is now archived. Commenting has been disabled