Replies

1. 
   _mj_ | Feb 03, 2023 10:13am | #1

   Take a look at the Laguna 14BX... 2.5HP and resaws to 12".

   The Harvey C14 looks like the same exact saw as the no longer available Laguna SUV (I have the SUV) except for the guides (tool-less now!) and paint... 3HP and resaws to 14".

2. 
   gulfstar | Feb 03, 2023 10:33am | #2

   I second , the Laguna clone is the way to go then there is the Hammer N4400.

3. 
   john_c2 | Feb 03, 2023 12:42pm | #3

   I have a Laguna and it's fantastic. My old Delta clone was crap at resawing.

4. 
   user-210490 | Feb 03, 2023 04:28pm | #4

   I also have the laguna suv 14 and really am happy with it.

5. 
   stevieray | Feb 04, 2023 06:19am | #5

   Hey, I have a SUV and have a question: how can I get the table to stay in one position, presumably at right angles to the blade? There are two adjusters under the table and both are screwed down as tight as I dare.

1. 
   Deleted | Feb 04, 2023 07:17am | #6

   “[Deleted]”

2. 
   hotdogman | Feb 04, 2023 07:40am | #7

   Call the manufacturer.

3. 
   gulfstar | Feb 04, 2023 08:34am | #8

   The knobs are small and there are obstructions so it takes all I have also to keep the table square , I would replace them with ratcheting levers like the one that closes the table gap but female instead of male.

6. 
   jasbuilder | Feb 04, 2023 03:36pm | #9

   I have an old Delta still good for detail work bought a Harvey C14 for resawing several months ago. It’s been great. Paid about $2100 with shipping.

1. 
   _mj_ | Feb 06, 2023 09:52pm | #11

   How are the tool-less guides?

1. 
   jasbuilder | Feb 07, 2023 04:49pm | #12

   Easy beans

7. 
   fattboyy | Feb 06, 2023 06:09pm | #10

   I too have the Laguna (replaced my delta). I love it so much, I bought one for my brother.

8. 
   Trails_Wood | Feb 08, 2023 06:05pm | #13

   I have the Harvey C14. They make the Laguna as well as some Rikon and Grizzley bandsaws. They tend to go on and off sale so I'd wait until they do. Right now they are on sale for $1,720 as of 2/8/23. I like my 3hp 240v option. Works great.

9. 
   deximcropz | Feb 09, 2023 05:24am | #14

   I have a SUV and have a question: how can I get the table to stay in one position, presumably at right angles to the blade?

   https://get-vidmateapp.com/
   https://get-mobdroapk.com

1. 
   john_c2 | Feb 09, 2023 05:56am | #15

   Is your saw mobile, and do you move it around? Do you pull by the table when you do?

10. 
    davidsmith0726 | Feb 09, 2023 05:59am | #16

    I bought a Jet 14" steel frame band saw when they first came out. A Laguna was on display right next to it for about the same money. I regret buying the Jet instead of the Laguna. The Jet is not bad for resawing, especially with a Highland Wood Slicer blade, but it's never quite measured up.

1. 
   hotdogman | Feb 09, 2023 09:32am | #17

   That is good to know. I was also looking at the Jet bandsaw and wondering how it matched up. Thanks for the information.

11. 
    hotdogman | Feb 09, 2023 09:33am | #18

    I appreciate all of the responses to my question. Folks seem to be happiest with the Laguna bandsaw.