Hi,
Thought I’d try the Blum tandem full extension drawer glides on my bathroom vanity. I picked up the wrong glides, I got the glides for drawer thickness of 5/8 instead of 3/4. I took the excess from the sides by triming the bottom underside the the table saw so now the glides work good………. except, the drawers won’t go back flush with the frame. I’m thinking that all four sides of the drawer needed to be 5/8 and not just the sides. Can anybody confirm this? I solved the problem by moving back the track on the cabinet 1/4″ but that was a bit of a pain. Any help appreciated.
Mike
Replies
You are correct. The under mount style slides reference from the backside of the drawer box front. But you did the right thing. moving the mount back will solve the problem.
Pardon my spelling,
Mike
Make sure that your next project is beyond your skill and requires tools you don't have. You won't regret it.
This forum post is now archived. Commenting has been disabled