I posted this over in Fine Homebuilding with not much luck thus far. Question is: Does anyone knew if Crown Point Cabinetry in New Hampshire makes their own hardware or do they have a supplier? If outside supplier does anyone know who that might be? I’m trying to match some existing hinges, bin pulls, and cabinet knobs and have come up empty so far. Crown Point does not sell their hardware separately.
Thanks for any responses.
Replies
Joe,
Can I assume you have or are looking at their arts and crafts/mission style cabinets? If so, the style of hardware that I have seen on their ads is readily available in many qualities and styles. I would start by getting to the " American Bungalow" website at ambungalow.com. This specialist magazine has many links to their advertisers who supply period hardware. You can also try the Rockler catalog which has two grades of mission style hardware. bear in mind, for good stuff be prepared to pay upwards of 30-50.00 for pulls. Good stuff though and very well made.
Yes, I have found a bunch of similar hardware but ideally I want to match them exactly since I have some existing cabinetry made by them and I'm planning on expanding the kitchen a bit and adding a pantry cabinet and a couple of other cabinets. I'd like it to be the same but would settle for something really close. Specifically, I'm looking for an egg shape brushed nickel cabinet pull, a chrome hinge of similar style, and a brushed nickel bin pull. They're more of a Shaker type influence. In case you're interested they are styles V-28 and V-29 on their Victorian Hardware Board (although I don't think they're really Victorian) at http://www.crown-point.com/Hardware/Victorian/vichdw.html. The hinge style is that shown at http://www.crown-point.com/OldCupboardSMapleNutmeg.html.
What do you think, am I being a little too particular about matching exactly or nearly exactly? I've found a similar egg shaped pull and the bin pull and the new cabinets will be located at least 6 feet from any existing cabinet. The hinge though has been harder. If you recognize a similar one let me know.
Thanks for the reply Earl.
The last time I saw Crown Point cabinets, they had Amerock hinges. I didn't see the pulls.
This forum post is now archived. Commenting has been disabled