Replies

1. 
   dgreen | May 03, 2006 08:05am | #1

   It comes prewired for 120v, you won't need a transformer to run it on the higher voltages but you will have to change the plug and change the wiring in the motor junction box. It's not hard and Deltas instructions are generally good. If you have the room you will be a lot happier with the 14" than the 10"

   
   

   ---

   Edited 5/3/2006 1:06 am ET by dgreen

1. 
   Masrol | May 03, 2006 08:23am | #2

   Thanks dgreen,

   Actually I did sent  this enquiry to one of those on-line shops 2 days ago, but have not got any reply yet. Looks like  faster to get  info  from  your  good self.

   Thanks for being so helpful.  Have a good sleep !

   Masrol

   KUL 1:19 PM

    

    

1. 
   Mtn__Bob | May 04, 2006 04:39am | #3

   Delta says you also have to change the switch when you rewire the motor for 240 V. My guess is the switch only removes power from one leg of the 240 - you need a double pole switch to completely cut the power to the motor.

1. 
   Masrol | May 04, 2006 05:17am | #4

   Thank you Bob for being so helpful.

   I have yet to decide. What really worries me now is assembling the parts. l'm not sure whether  I would be able to do that.  I am  going through  the manual  right now.  Do think  it is  not  so complicated ?

   Masrol

    

   Edited 5/4/2006 2:37 am by Masrol