Delta 46-700 Lathe Bearing Replacement
![](https://secure.gravatar.com/avatar/31753dd053a77eb35563ebf7d9765e21?s=52&d=https%3A%2F%2Fimages.finewoodworking.com%2Fapp%2Favatars%2F200x200%2Fm.png&r=g)
I am having problems removing the spindle bearings. If anyone has successfully done this, I would appreciate a how-to description of the procedure. I have the spit rings removed on both ends of the spindle and re-clamped the belt pulley so as to allow the spindle assemble to slide forward. I can not seem to figure out how to separate the bearings from the shaft. Thanks for your advice….Mark
This post is archived.