Replies

1. 
   gecko | Jul 03, 2004 11:56pm | #1

   take a sample of the factory finished wood and a 2 square foot piece of raw wood into a high end finish supplier, they should be able to match it well.

   Custom Cabinetry and Furniture

   http://www.BartlettWoodworking.com

    

2. 
   migraine | Jul 04, 2004 04:43am | #2

   Contact them to "purchase" some of their stain.  Many companies will sell their stain, along with the top coat finishes.  Plus, most companies spray their stain on.  This will make a diference in the final color.

   Try contacting a local "Mohawk" or "Behlin" supplier.  Many companies use their products for their finishing process.

3. 
   BG | Jul 05, 2004 02:50am | #3

   Quickstep,

   About a year and a half ago someone asked about a factory finish on cabinets ....one of the responders happen to be knowledgeable about the process....I think there were 22 steps with more chemicals than found in store bought white bread and lots of heat, pressure and vacuums....in other words, impossible to duplicate with out the same setup.  It would seem your best bet has already been suggested by the other responders...good luck 
1. 
   Quickstep | Jul 05, 2004 03:32am | #4

   Luckily (maybe) the finish I'm trying to duplicate doesn't appear to be too adulterated. It's not monochromatic like some factory finishes. I think I'm going to try to get some stain and lacquer from the manufacturer. Failing that, I'll try a light stain and shoot a high quality catalyzed lacquer and see what happens!