Replies

1. 
   MBerger | Oct 25, 2006 08:02pm | #1

   Typically, a scale illustration will give directions for enlarging to full size. For example, if it says "drawn at quarter scale (1/4 in. = 1 in.)" then you need to enlarge the sketch by 400 percent.

   Your best bet is to enlarge them on a photocopy machine that can print on large paper, or print tiles that can be taped together. If you have a local Kinkos or office supply store, they usually have the right equipment. If you don't have access to a place with enlargement equipment, use a standard copy machine to enlarge sections of the drawing and then tape them together carefully.

   Matt Berger
   Fine Woodworking

1. 
   handdoc | Oct 27, 2006 10:01pm | #2

   Thanks- I'll give Kinko's a try.