Replies

1. 
   SteveSchoene | Feb 25, 2010 06:18pm | #1

   Can you post a picture or diagram of the vise, or perhaps give a detailed description.  

1. 
   DonStephan | Feb 25, 2010 08:03pm | #2

   Don't have a picture of the bench, but my experience is, if the vise is a quick release front vise, buy the best you can afford from the most reputable source.

2. 
   Jammersix | Feb 27, 2010 05:42pm | #3

   I would suspect that the front vise isn't specified so you can use whatever vise you prefer for your kind and style of work, or whatever vise is readily available near you.

3. 
   SteveSchoene | Feb 27, 2010 11:28pm | #4

   The vise does appear in the video by Hack on using it.   To my eye it isn't a model commonly, or currently available--cerainly not  a Record imitation.  I think you will have to use a vise of your own choosing and modify the mounting to fit.  Do follow Hack's instruction to have the front vise inset sufficiently that it's inner jaw (including wooded facing) ends up flush with the front face of the bench.   mThe only semi-recent review I've seen of vises gave rather surprising results so I would take it with a grain of salt--pretty much good advise on all reviews.