*
Hi All,
I am planning to build a glass topped coffee table. The top will be a panel and frame with the glass covering the panel only. Do I need to do any special finishing of the underside of the panel? I usually use tung oil to finish. The panel will be solid curly maple.
Thanks.
Paul Ebert
Replies
*
No special finishing required to either side of the panel.
*Paul, My glass store recomends that the glass NOT lay flat on a finish. The supply with any glass Cork or clear plastic disks about the size of a nickle (5/8 ") to put under the glass. I have topped several tables and there is no effect on the glass or wood. However, my grandaughter tries very hard to pick the disks up.Warren
This forum post is now archived. Commenting has been disabled