Replies

1. 
   _mj_ | Oct 08, 2020 05:17pm | #1

   Flying blind here w/o photos. Open-ended suggestion would be to put to put the piece in a box /bag with a dehumidifier for a week. The dehumidifier would have to drain outside the bag/box, not collect in an onboard tank. If the sticking is moisture related it should free up. If it is stuck by a finishing product it's a crapshoot.

2. 
   john_c2 | Oct 08, 2020 06:38pm | #2

   If you aren't in a hurry, and it gets a lot less humid in winter where you are, wait a bit. As above, if it's moisture related swelling, drier air will help. But it takes time, weeks maybe, of dry air to shrink the wood.

   It could also be the finish causing it to stick. You can try some gentle raps with the heel of your hand to break the seal between parts.

3. 
   mikaol | Oct 08, 2020 07:53pm | #3

   If it's moisture you could try a hair dryer
   Mikaol

4. 
   NixaJim | Oct 09, 2020 10:44am | #4

   I'm pretty much technically challenged but I think I attached a pic. I'm certain it's not the finish because I've used in the past over the past 4 or 5 years. I'm going to try the hair dryer (if you could see my head you can see I don't have much use for one) if that doesn't work hope mom nature will step in.

   It's the column on the left of the project door.

   
5. 
   Deleted | Oct 09, 2020 12:56pm | #5

   “[Deleted]”