In my quest at a full conversion from plastic to spiral piping i have decided that hoods for the Miter Saw and Radial Arm Saw are needed. Do any of you have plans or photos of some hood styles that you have built? Any would be appreciated. I have few ideas in my head, but any help would be appreciated. My sytem will come off a 6″ main and reduce to a 6x5x2-1/2. The 2-1/2 will attach to the factory outlet on each saw and the 5″ will collect at the hood.
Aaron
Replies
Here is my setup. Works well.
Cheers,
Peter
Aaron,
Here's a link to something along the lines of what you are looking for.
http://www.terryhatfield.com/MShood.html
Terry
Perfect, Thanks to both of you.
I recently bought a Makita LS1013 sliding miter saw - it's the 5th miter saw I have owned - and to my great surprise the little purple bag on the back of the saw actually picks up most of the sawdust. I just went to my shop to check and there's very little sawdust on the table or the floor.
This forum post is now archived. Commenting has been disabled