Replies

1. 
   HeidiDad | Oct 29, 2002 08:44pm | #1

   I also have this same exact jointer, and just downloaded the instructions.  I have found it a good little unit.  I got it from my Dad who got it from an estate sale in the late 50's.   One word of advice. Don't take it apart to "clean it up" .  Leave it as is and lubricate as needed.  DON'T TAKE IT APART!!!!  Unless of course it doesn't cut straight now.  Then you have nothing to loose.   Good luck and Happy sawdust Trails.

1. 
   gunnee | Oct 30, 2002 01:01am | #2

   were did you down load the instruction from, you didn't tell me that..   bim

1. 
   riverr1 | Oct 30, 2002 01:06am | #3

   Click on the link in the second message. It will take you to the manual.

   My first table saw was a rockwell, tilting tablejointer machine. It had a very similar fence to what is shown for the machine. It was a great fence.

   Don

1. 
   gunnee | Oct 30, 2002 01:12am | #5

   thanks i got it happt woodwrking to you    bim

2. 
   gunnee | Oct 30, 2002 01:08am | #4

   thanks alot! you are a god sent.