Replies

1. 
   highfigh | Nov 17, 2004 01:44am | #1

   Where are you located? Most parts of the country have a supplier for things like this, although 5/8" may be harder to find. I am hearing that a lot of suppliers carry more 1/4" and 3/4".

   I cut this piece four times and it's still too short.
1. 
   trusche2 | Nov 17, 2004 03:29am | #2

   Central CA.  Woodfinder didn't register anyone within 200 mi.

1. 
   Dave45 | Nov 17, 2004 03:42am | #3

   Try McBeath Hardwoods in San Francisco and Berkeley.  I've bought from them and they have a great selection.  If they don't have it, they may be able to get it - or send you to a source.

   5/8" will probably be hard to find.  I can't remember when I last saw that thickness.

1. 
   highfigh | Nov 17, 2004 04:36am | #4

   One way to get 5/8" with that grain is veneer it yourself on Baltic Birch plywood. If you need a lot of it, there are some companies that will veneer batches by special order. Otherwise, check with a local cabinet shop to find out where they get their material from.I cut this piece four times and it's still too short.