I recently acquired a used, 2 HP Oneida Component Cyclonic Dust Collector. This is the model that can use either an internal or external filter and was available in the early 2000’s. Over the years and different houses the previous owner had it initially supported with the Oneida supplied brackets and eventually changed to a homemade rack on wheels. The rack will not work in my setup and he lost track of the brackets. Oneida no longer sells those brackets and their other available wall hanging brackets will not work with this DC.

 

So I am planning to make my own brackets out of some angle iron. The documentation that came with the DC as well as what is available on the Oneida website archives has some information about how to install the brackets with this DC, but not enough details to replicate their design. I was hoping someone on this forum who has one of these machines supported by those brackets could take some measurements from their setup and provide me with more information. The details I am looking for would be the dimensions of the angle iron, thickness of the metal, location and size of holes and details about how the pieces are welded together. Photos would be useful, too.

 

Thanks to anyone who can lend a hand.

 

Larry