Replies

1. 
   eweber2 | May 02, 2007 10:42pm | #1

   I own and have used  the G0490 for over a year now. I have no major complaints this is a good machine for the price.

   The built-in caster system is a little awkward to use (the center of gravity of the jointer is very high so negotiating tight curve is a dangerous operation).

   One thing to be aware is that the handles to setup the height of the infeed/outfeed table are relatively hard to use if you are looking for a super precise adjustment. This is usually not a problem for the infeed table but the outfeed table need to be set exactly flush with the blades. To save myself some headhakes, I did invest in a jig to setup the blades and never move the outfeed table.