Replies

1. 
   Rennie | Sep 07, 2006 11:05pm | #1

   Check out Wood Magazine's site, their "Idea Shop" links. Some fine examples.

   Also, check out the New Yankee site. Norm has plans for one of these he built a few seasons ago.

   Rennie

   A man is a fool if he drinks before he reaches the age of 50, and a fool if he doesn't afterward.
   Frank Lloyd Wright

1. 
   trucker | Sep 10, 2006 10:17pm | #4

   Thanks so much, I,ll check  it out

2. 
   MRGreer | Sep 08, 2006 12:22am | #2

   Also check out the current edition of Shop Notes, really nice set up, just what you are looking for I believe.

1. 
   Rennie | Sep 08, 2006 12:31am | #3

   Thanks - That's on my "to read" pile on the night stand. Missed that one completely. You're right, it is a good design. Shoulda remembered that one!Rennie

   A man is a fool if he drinks before he reaches the age of 50, and a fool if he doesn't afterward. Frank Lloyd Wright

2. 
   trucker | Sep 10, 2006 10:18pm | #5

   Thanks so much I,ll go get this issue

3. 
   Dave45 | Sep 11, 2006 04:33pm | #6

   I don't have any plans but here are some pictures of my setup.  It works very well for my garage shop operation. 

   If I were doing it over, I would put some baffles in the dust collection compartment to get the sawdust closer to the DC port.  Right now, I have to open the front panel and push the sawdust into the port every few days.

   
1. 
   trucker | Sep 11, 2006 08:29pm | #7

   Dave,, Thanks soooomuch that is more like I,m looking for. The only other thing i want is to add a table with draws under the right side extention table!!The pictures are great.....

1. 
   Dave45 | Sep 12, 2006 06:25am | #8

   Too bad I don't have any plans for it.  I just made it up as I went along and used up a bunch of scrap plywood I had laying around.  The color scheme is based on some old paint I wanted to get rid of - lol.

   Like I said earlier, I would do a couple of things differently if I did another one.  I'm thinking about upgrading to a Craftsman "zip code" cabinet saw next year.  Want to buy this from me if I do? - lol

1. 
   trucker | Sep 12, 2006 02:09pm | #9

   Hiya Dave,, Thats what i was trying to get around was building it with no plans on hand but thats probably just what I,ll have to do! I have looked all aroung for the plans but can,t find one i like that does everything i want to do! I want to build the cabinets under my saw with dust collection and build a cabinet under the right side extention has well has build a cabinet on the end of the saw for a bench has well has storage..  Thank god i have a good size workshop to get around in. (32 by 32) and then i can put rollers on the whole thing then i can even roll it around the shop.. Thanks so much for your help!!!!

4. 
   JLMCDANIEL | Sep 13, 2006 01:16am | #10

   See if this is what you want workbench

   Jack