Replies

1. 
   frenchy | Apr 17, 2006 08:38pm | #1

   larrywoods, 

    Open box take,  out planer,  run test board thru planer to see what if anything it needs..

    If it needs sharpening check to see if the blades can be inverted, in which case you remove the blades and reinstall them upside down..  See if they are disposable or if they should be resharpened..

     If they need to be resharpened, take them to the guy who sharpens your saw blades, For advanced woodworkers, you can bring them to a printers supply service, printers need the same kind of blades and actaully sharpen them to a finer degree than wood workers (cheaper) 

     Make saw dust!

1. 
   larrywoods | Apr 17, 2006 11:06pm | #2

   Frenchy:

    

   Thank you for some excellent advice .... just do it! 

    

   Larry