Replies

1. 
   jackiechan | Jan 18, 2005 02:57am | #1

   Charlie,

   Al Amaral's web site has the step by step instructions, with pictures, of the outfeed table that he built for his table saw.  It is a solid design that would be a valuable addition to your saw.  It is a partial metal construction, but strong hardwood could be substituted.

   http://members.aol.com/Alamaral/Outfeed.html

   If you have any questions, please feel free to ask.

   Dan Kornfeld, Owner/President - Odyssey Wood Design, Inc.

1. 
   barcok9 | Jan 18, 2005 05:59pm | #2

   Thanks Dan,

   I was able to find that photo before I posted my message.

   I want to find a plan for an L shaped outfeed table that will be the entire length of the back side of the saw(4'x8') and come around to the right side of the table, about (24"x36")?.

   I saw one such table at a local woodworking shop that was considering liqudating their tools a few years ago.

   They are still in business and I plan on stopping by sometime to try and get permission to photograph their design.

   If I am successful, I will post photo's.

   Thanks Again,

   Charlie

2. 
   JMartinsky | Jan 18, 2005 10:19pm | #3

   I use a Delta Unisaw:-). I am "holding" it for a friend. Much better than MDF on horses!

   John