Powermatic 6″ (mod 54A) jointer dust collection problem
pconnor
| Posted in Power Tools and Machinery on
I have a power matic 6″ jointer. Recently I removed the head and the locking key so I could skew the fence. After replacing the key and head to the “square” position, my dust collection system will not pull the chip out anymore. The chips blow out from where the blades are. The vaccume is working fine and I can’t find any clogs. Anyone have any ideas? Thanks in advance Pete
Replies
PM Jointer clog
Thanks. The coat hanger did not clean it out, but using my shop vac up in the dust port got the clog out!
This forum post is now archived. Commenting has been disabled